Daiyo DDB 33W User Manual

LED Indicator
Auto-Learning Code Button
Sound-and-Flash Switch Button
Melody Selector
Volume Button
Receiver
Push Button
Transmitter
1
Accessories List:
● 1 x Receiver ● 1 x Transmitter ● 1 x User Manual
● 3 x Wall Plugs ● 3 x Screws ● 1 x Double-Sided Adhesive Tape
● 1 x 3 Volts CR2032 Battery for Transmitter
Technical Specification:
Frequency: 433.92 MHz ● Modulation Type: ASK
Ring Volume: >85dB (within 0.5m)
● Receiver Bandwidth: ± 90 KHz
Transmitting Power: ≤10mW ● Operating Range: <150m (in the open air)
Channel Space: 1 million sets of auto-learning codes
Receiver Power Consumption: <200uA
Transmitter (Standby Mode): 5uA; Transmitter (Working Mode: <10mA)
Power Supply (Receiver): DC3V (2 X 1.5V AA Not Included)
●
●
●
●
●
●
●
● Power Supply (Transmitter): DC 3V (CR2032)
Names for Parts
Battery Installation(Transmitter):
● Use a screwdriver to ply open the Transmitter cover. Gently twist the screwdriver to open.
● Place the CR2032 battery (included).
CR2032 3V
Lithium
Battery
INSTRUCTION MANUAL
MODEL NO : DDB 33W

Daiyo DDB 33W Specifications

General

Brand	Daiyo
Model	DDB 33W
Category	Accessories
Language	English

Summary

Product Details and Components

Technical Specifications

Detailed technical parameters for the wireless door chime system, including frequency and power.

Component Identification

Labels and identifies the key parts of the receiver and transmitter units.

Transmitter Battery Installation

Instructions for correctly inserting the CR2032 battery into the transmitter.

Installation and Setup Guide

Transmitter Mounting Options

Guidance on attaching the transmitter to a wall using screws or adhesive tape.

Receiver Power Setup

Instructions for installing AA batteries into the receiver unit.

Receiver Wall Mounting

Steps for drilling and securing the receiver to a wall, avoiding certain locations.

Receiver Configuration Steps

Guides for pairing, selecting melodies, modes, and adjusting volume.