1.5 Mic Pre II Specifications
• Jensen transformer-balanced inputs
• THAT Corporation differential output amps
• Discrete transistor circuitry
• Class A amplifiers for the preamp and High-Pass Filter
• 70dB of gain
• Continuously variable Gain Control
• 20 segment LED VU Meter (-20 to +25)
• +23dBu overload indicator
• Floating peak indicator
• All relay switching with gold bifurcated contacts
• Switchable +48 Volt Phantom power
• 20dB pad on mic input
• All-metal construction with stainless steel chassis for noise immunity
• Custom aluminum knobs
• Power supply included
• Inputs: 2 x XLR, Outputs: 2 x XLR, 2 X TRS
• 1U 19” rack-mount case: 17” (43.18cm) width, 8.375” (21.27cm) depth, 1.625
(4.13cm) height.
• Unit weight: 5.35 lbs. (2.45 kg)
• Box weight: 8.70 lbs. (3.95 kg)
• Box dimensions:!L: 29” (73.66cm) (736.6mm)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!W: 14” (35.56cm)!(355.6mm)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!H: 6” (15.24cm)!(152.4mm)
Specifications are subject to change without notice.
To Previous Page
Loading...