To Next PageTo Next Page
Need help?Do you have a question about the Dakota Digital PAC-2700 and is the answer not in the manual?
General| Compatibility | Universal |
|---|---|
| Input Voltage | 12V DC |
| Output Voltage | 12V DC |
| Weight | 0.5 lbs |
| Type | Fan Controller |
| Features | Digital Display |
Explains how the controller functions, including temperature monitoring, fan activation, A/C clutch engagement, and delay times.
Crucial advice on ensuring gauge accuracy for proper fan control and potential issues if not reading correctly.
Lists essential parts and covers mounting, terminal connections, and relay wiring for setup.
Describes the default settings for sender type, fan speed, and temperature thresholds.
Detailed instructions for setting temperature scales, fan types, and sender selection using control buttons.
Guide for calibrating the controller with gauges not listed in presets via numerical marks.
Detailed steps for calibrating the controller to specific gauge markings, moving from cold to hot temperatures.
Procedure to restore the controller to its original factory settings and clear custom calibration data.
Method to test installation and fan operation by simulating temperatures without the engine running.
Lists common problems, their causes, and recommended solutions for display errors and fan operation.
Addresses further issues like gauge setup errors and fans cycling on/off near the set point.
Details on how to get the product repaired and its 24-month warranty coverage.
