Need help?Do you have a question about the DAKtel DT-7X and is the answer not in the manual?
General| Brand | DAKtel |
|---|---|
| Model | DT-7X |
| Category | Home Automation |
| Language | English |
Details on the included base, handset, communicator, and low power RF hub.
Technical details for 4G LTE, DECT, Wi-Fi modules, and RF bands.
Key features include SOS, 2-way voice, room monitoring, and range.
Information on optional DECT Communicator and Low Power RF Transceivers.
Detailed diagrams of the DECT handset's front and back controls.
Diagrams of the base unit's front (LEDs) and back (ports).
Details on base back side sockets and LED indications.
Instructions for SIM card insertion and handset registration.
Instructions for using Wi-Fi and setting up the personal hotspot.
Overview of accessing and navigating the handset's menu options.
Functions for viewing call history and managing phone book entries.
Options include unregistering devices, ring setup, and PIN modification.
Configuration for language, portable part, and telecom connections.
Procedure for registering low power RF transceivers like pendants.
Explanation of how lost links are indicated and the 24hr alert delay.
How to trigger alarms and adjust fall detection sensitivity.
Instructions for resetting the base unit to its original settings.
Customizing handset alarm, ringtones, key sounds, and language.
Settings for handset naming, auto-answer, and date/time configuration.
Options for multi-base systems and adjusting display contrast.
Procedure for resetting the handset to its original manufacturer settings.
Setting SOS numbers, SMS alerts, daily check, and SOS voice.
How SOS calls are handled, including cancellation and alarm memory.
Information on SMS commands for SOS, battery, and periodic checks.
Steps to activate and configure daily check SMS alerts.
Options to enable or disable voice prompt announcements for SOS calls.
How to preset priority numbers for automatic answering.
Enabling and controlling the room monitor feature with security codes.
Step-by-step guide for registering communicators and handsets.
How to verify if devices are successfully registered to the base unit.
Using speed dialing and making internal intercom calls.
Operations for amplifier boost, volume adjustment, and mute.
Making conference calls and using speakerphone mode.
Device range, battery life, and display indications for errors.
Registering the communicator and overview of its features.
Managing communicator settings and making internal calls from the handset.
Configuring ring, vibration, audio, and internal calls for the communicator.
Explanation of the blue, red LEDs on the communicator and charger.
Summary of the unit as a security alarm, with SOS and 2-way voice.
Overview of usage time, standby time, and low battery alerts.
To Next Page