EasyManua.ls Logo

Dakwit TK800 - Working Mode; Set Command by APP or SMS

Dakwit TK800
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
platform (please set DNS and port,set apn)
(Use the default platform, don't need to operate 6.2)
7) Working mode
【Mode 1】:real-time tracking (default)
every 3mins/1 times,can work 10 days,can’t anti-jammer and anti detection
【Mode 2】:24 hours cycle mode
every 24 hours/1 times positioning,can work 3 years
【Mode 2】:clock mode(can set up 2-6 times positioning per day )
every 24 hours/2-6 times positioning,can work from 6 months to 18 months
【Mode 4】: smart cycle positioning(10mins)
every 10 mins/1 times, device upload position , then device turn off
Until the next cycle positioning again
Positioning time interval can be changed, time is ≥10mins
【Mode 5】: smart turn on/off mode (deep sleep save power mode)
(static turn off save power, vibration or falls off alarm start work)
8.Set Command by APP or SMS
NOTE:
1) Device default password:123456)
2)use of mobile phones send messages to the tracker about all set command
3)After admin number setting, all alarm message will send authorization number
other cell-phone number send command will not reply
4)If you want standby time longer, pls don't open move alarm, and real-time
location tracking.etc

Related product manuals