3 Setting up and installation
Seite | 38
Electrical connection
The prerequisite for the electrical connection is a professionally installed protective
contact socket with its own adequate fuse protection (220-240V~/50 Hz/10A). The use of
a pulse-sensitive fault-current circuit breaker (RCD switch) is recommended.
ELECTRIC SHOCK HAZARD!
The appliance must be earthed according to the local regulations. For this purpose, the
plug of the connecting cable is fitted with a contact provided for this purpose.
FIRE HAZARD
Do not connect the appliance to a multiple socket, power strip or similar.
➢ Contact an electrician if the mains plug does not fit into the socket.
➢ Do not use an extension cable with an adapter plug for this
appliance.
To Next Page
Loading...