Dale Tiffany TA100351 User Manual

ASSEMBLY INSTRUCTIONS:
Item No: TA100351
1. Place the base on a level surface.
2. Insert the harp (B) until it sits firmly into the saddle (A).
3. Adjust the knurl nut (C) on harp (B).
This can be used to raise the shade a little if necessary.
4. Place the shade (D) over the end of the harp (B) and
tighten the finial (E) securing the shade in place.
5. Insert the bulb into the bulb socket.
Recommended (1) maximum 25 WATT Type “B” Bulb
Or (1) maximum 0.5 watt CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 12/3/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.

Dale Tiffany TA100351 Specifications

General

Brand	Dale Tiffany
Model	TA100351
Category	Home Lighting
Product Category	Table Lamp
Style	Traditional
Number of Bulbs	2
Bulb Type	E26
Bulb Included	No
Wattage	60W
Switch Type	Pull Chain
Material	Metal, Glass

Summary

Lamp Assembly Instructions

Place Lamp Base

Position the lamp base on a level surface for stability.

Attach Harp to Base

Insert the harp (B) firmly into the saddle (A) on the base.

Adjust Harp Nut

Adjust the knurl nut (C) on the harp (B) to raise the shade if needed.

Secure Lamp Shade

Place the shade (D) over the harp (B) and tighten the finial (E).

Install Light Bulb

Insert the recommended light bulb into the bulb socket.

Bulb Specifications

Use one 25W Type 'B' bulb or one 0.5W CFL bulb (not included).

Lamp Cleaning and Maintenance

Cleaning Procedure

Unplug the lamp and wipe with a damp cloth; avoid using abrasives.

Important Safety Instructions

Electrical Safety

Instructions for polarized plug and safe electrical connection.