Dali IKON SUB MK2 User Manual

43
F I G U R E 3
TABLE 2 - IKON SUB MK2 TECHNICAL SPECIFICATIONS
13
All technical specifications are subject to change without notice.
D
C B
E
J
A
F
I
H
G
IKON SUB MK2
Frequency Range +/- 3 dB [Hz] 26-200
Nominal Impedance [ohms] 30k (L/R) 20k LFE
Maximum SPL [dB] 113
Max Amplifier Power Output [watts RMS] 325
Crossover Frequencies [Hz] 50-130
Low Frequency Driver(s) [inches] 1 x 12” long stroke
Enclosure Type Bass reflex
Continuous IEC Power Output [watts RMS] 250
Max. Power Consumption [watts] 500
Idle Power Consumption [watts] 9
Connection Input(s) RCA, Stereo (low-pass filtered)
LFE (Mono)
Recommended Placement Floor, near wall or corner
Dimensions (H x W x D) [mm] 450 x 410 x 450
Dimensions (H x W x D) [inches] 17.7 x 16.1 x 17.7
Weight [kg/lb] 29.0 / 63.9
Accessories M8 Spikes, Rubber Bumbers, Spanner
for spikes, Manual, Power cord

Dali IKON SUB MK2 Specifications

Audio Specifications

crossover frequency range	50 Hz to 130 Hz
phase angle options	0 degrees or 180 degrees

Power

power mode settings	ON, AUTO, OFF