EasyManuals Logo

Dali Lektor User Manual

Dali Lektor
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Binding Posts | The gold-plated binding posts accept bare wire ends
and 4 mm banana plugs and are mounted directly on the crossover.
For your safety, terminals are covered with a transparent polymer to
prevent short circuits.
Metallic Standoffs | Each DALI LEKTOR loudspeaker is fitted with
distinctive, decorative, yet highly functional aluminum snap locks on
the edge of the baffle for firm, tight mounting of the front grilles.
LEKTOR 1
28 mm tweeter with acoustic lens | 4,5” mid/bass |
Flexible placement | 51 - 27,000 Hz | H: 260 x W: 146 x
D: 211 mm | 3.1 kg | H: 10.2 x W: 5.7 x D: 8.3” | 6.8 lbs
Where space is at a premium, but compro-
mises on performance are unacceptable, the
diminutive LEKTOR 1 offers bountiful sound
from an ultra-compact enclosure.
Featuring the unique snap-on grille attach-
ments and handsomely styled panels found in
the floorstanding models in the LEKTOR range,
LEKTOR 1 makes DALI’s legendary design and
performance available at a remarkably attrac-
tive price point.
Drawing on DALI’s concerted research and
development efforts with access to the
latest innovations in driver design, LEKTOR 1’s
limitless musicality and distortion-free output
will make it a welcome addition to any living
space.
®
LEKTOR 2
28 mm tweeter with acoustic lens | 5” mid/bass |
Flexible placement | 49 - 27,000 Hz | H: 310 x W: 176
x
D: 221 mm | 4.1 kg | H: 12.2 x W: 6.9 x D: 8.7” | 9.0 lbs
With its DALI-designed 5” mid/bass driver,
LEKTOR 2 achieves an ultra-compact form
factor for convenient, discrete installation
in virtually any location. Primarily intended
for shelf or wall mounting, LEKTOR 2 can be
stand-mounted or even serve as a compact
upright center channel speaker
Going well beyond conventional expectations
for a speaker of its size, LEKTOR 2 effortlessly
sets new standards for the compact class,
delivering low end extension and precision
worthy of a much larger enclosure and open-
ing up a wide, deep, three-dimensional sound-
stage, with sharp image focus, rich musical
textures and an abundance of fine detail.
®
LEKTOR 3
28 mm tweeter with acoustic lens | 6.5” mid/bass |
Flexible placement |
48 - 27,000
Hz | H: 387 x W: 200 x
D: 255 mm | 6.4 kg | H: 15.2 x W: 7.9 x D: 10.0” | 14.1 lbs
LEKTOR 3 is the largest compact model in the
LEKTOR range, featuring a 6.5” mid/bass unit
capable of moving a substantial volume of air
to generate potent deep bass far beyond what
its modest dimensions would indicate.
With dual front-mounted bass reflex ports,
LEKTOR 3 can be placed on a tabletop or stand
or wall-mounted via the integral wall bracket.
Suitable for a stereo or a multi channel setup,
LEKTOR 3 is highly recommended as voice-
matched rear speakers with LEKTOR 8 or 6 in
front or as front and rear speakers in a com-
plete LEKTOR 3 surround system.
®
Dali_Lektor.indd 8 28/08/08 15:25:25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dali Lektor and is the answer not in the manual?

Dali Lektor Specifications

General IconGeneral
Sensitivity86 dB
Maximum SPL105 dB
Enclosure TypeBass Reflex
TypeBookshelf
Recommended Amplifier Power25 - 100 Watts
Recommended PlacementBookshelf

Related product manuals