Need help?Do you have a question about the Dali Opticon and is the answer not in the manual?
Instructions for safely removing speaker grille fronts, detailing the process of loosening plungers to prevent damage.
Guidance for floor-standing models (OPTICON 5, 6, 8) on using spikes/bumpers, optimal placement, and protecting floors from spikes.
Details on positioning the OPTICON 2 for stand mounting or shelf placement, using enclosed bumpers for stability.
Options for OPTICON 1 placement: stand, shelf, wall-mount. Instructions for wall bracket and bumper usage.
Placement advice for the center channel speaker, near TV screens, on stands or shelves, with bumper recommendations.
Information on wall-mounting OPTICON LCR, shelf use, rotating tweeter module, and DALI logo for horizontal orientation.
Explanation of speaker connection methods: single-wiring, bi-wiring, and bi-amping, including terminal usage and jumper removal.
Advice on preventing speaker surface fading or discoloration by avoiding prolonged exposure to direct sunlight.
Instructions for safely removing speaker grille fronts, detailing the process of loosening plungers to prevent damage.
Guidance for floor-standing models (OPTICON 5, 6, 8) on using spikes/bumpers, optimal placement, and protecting floors from spikes.
Details on positioning the OPTICON 2 for stand mounting or shelf placement, using enclosed bumpers for stability.
Options for OPTICON 1 placement: stand, shelf, wall-mount. Instructions for wall bracket and bumper usage.
Placement advice for the center channel speaker, near TV screens, on stands or shelves, with bumper recommendations.
Information on wall-mounting OPTICON LCR, shelf use, rotating tweeter module, and DALI logo for horizontal orientation.
Explanation of speaker connection methods: single-wiring, bi-wiring, and bi-amping, including terminal usage and jumper removal.
Advice on preventing speaker surface fading or discoloration by avoiding prolonged exposure to direct sunlight.
General| Sensitivity | 87 dB |
|---|---|
| Enclosure Type | Bass Reflex |
| Crossover Frequency | 2000 Hz |
| Recommended Amplifier Power | 150 W |
| High Frequency Driver | 28 mm soft dome |
| Low Frequency Driver | 6.5" Wood Fibre Cone |
| Connection Input | Single Wire |
| Recommended Placement | Shelf or Stand |
| Woofer | 6.5" wood fiber cone |
| Tweeter | 28 mm soft dome |
To Next Page
