Dali SUB C-8 D User Manual

13
UK DE DK JP CN FR
H) MAINS connector: Connect the supplied power cord to the MAINS connector and your
mains outlet.
s WARNING: MAKE SURE THAT CORRECT VOLTAGE IS SUPPLIED FROM YOUR MAINS
OUTLET BEFORE CONNECTION.
I) POWER MODE switch:
s ‘ON’: The power to the subwoofer will be controlled by the POWER switch.
s ‘AUTO’: When the main power switch is on, the subwoofer amplifier will turn on when an
input signal is detected on one of the inputs. When a signal is not detected for approximately
20 minutes, the subwoofer amplifier will go into standby-mode.
s ‘OFF’: The subwoofer will immediately go into standby mode.
J) PWR/PRT LED: Red: Standby. Blue: Active
K) Voltage switch
11.0 TECHNICAL SPECIFICATIONS
In Table 2 you will find the most common specifications for our subwoofers. Please have in
mind that there are countless methods for measuring subwoofers. However, none of them tell
you anything useful about how a subwoofer really sounds. Only your ears can decide whether
one subwoofer sounds better than another. Like all our speakers, DALI SUB C-8 D is designed
to reproduce music as honestly as possible.
Enjoy your new DALI SUB C-8 D!

Dali SUB C-8 D Specifications

General

Impedance	25000 Ω
Down-firing	Yes
Subwoofer type	-
Subwoofer sensitivity	109 dB
Subwoofer frequency range	33 - 200 Hz
Subwoofer crossover frequencies	40 - 120 Hz
Subwoofer driver diameter (imperial)	8 \
Power consumption (typical)	250 W
Material	MDF
Magnet type	Ferrite
Product color	White
Magnetically shielded	No

Weight and Dimensions

Subwoofer depth	310 mm
Subwoofer width	295 mm
Subwoofer height	335 mm
Subwoofer weight	10400 g