EasyManuals Logo

Dali SUB P-10 DSS User Manual

Dali SUB P-10 DSS
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
15
UK
10.0 AMPLIFIER BACK PLATE
(SE FIGURE 7)
A) VOLUME control: Press the ‘VOLUME’ button and adjust to the desired value using the ‘+’
and ‘-’ buttons.
B) CROSSOVER control: Press the ‘CROSSOVER’ button and adjust to the desired value using
the ‘+’ and ‘-’ buttons.
C) PHASE switch: Press the ‘PHASE’ button and adjust to the desired value using the ‘+’ and
‘-’ buttons.
D) LINE input: Connect the “LEFT” input connector (white) to the LEFT RCA line output connector
of your stereo/surround sound (pre-) amplifier. Connect the “RIGHT” input connector (red) to
the RIGHT RCA line output connector of your stereo/surround sound (pre-) amplifier.
E) LFE input: Connect the “LFE” input connector (black) to the LFE RCA line output of your
surround sound amplifier.
F) POWER switch: Set the switch to ‘ON’ to power up the subwoofer. Set the switch to ‘OFF’
to power off the subwoofer.
G) FUSE compartment: If the subwoofer fails to power up when connected to the mains and
the POWER switch is set to ON, the fuse may have blown or be faulty. Replace the fuse
with the same type as originally supplied – see fuse type on the amplifier back plate. If
the fuse blows repeatedly, have the subwoofer checked at an authorised service centre
– contact your authorised dealer.
H) MAINS connector: Connect the supplied power cord to the MAINS connector and your
mains outlet.
• WARNING: MAKE SURE THAT CORRECT VOLTAGE IS SUPPLIED FROM YOUR MAINS
OUTLET BEFORE CONNECTION.
I) POWER MODE switch:
• ‘AUTO’: When the main power switch is on, the subwoofer amplifier will turn on when
an input signal is detected on one of the inputs. When a signal is not detected for
approximately 20 minutes, the subwoofer amplifier will go into standby-mode.
• Setting the POWER MODE switch to ‘MANUAL’ means that the subwoofer can only be
switched ‘ON’ or ‘OFF’ by means of the remote control.
11.0 TECHNICAL SPECIFICATIONS
In Table 2 you will find the most common specifications for our subwoofers. Please have in mind
that there are countless methods for measuring subwoofers. However, none of them tell you
anything useful about how a subwoofer really sounds. Only your ears can decide whether one
subwoofer sounds better than another. Like all our speakers, DALI SUB P-10 DSS is designed to
reproduce music as honestly as possible.
Enjoy your new DALI SUB P-10 DSS!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dali SUB P-10 DSS and is the answer not in the manual?

Dali SUB P-10 DSS Specifications

General IconGeneral
BrandDali
ModelSUB P-10 DSS
CategorySubwoofer
LanguageEnglish

Related product manuals