DallaCorte DC II GCS - User Menu Operations; Programming Doses; Coffee Counter Visualization

5
USER’S MANUAL RELEASE 1.07
USER’S MENU
The user can enter some menus to perform the following operations:
HOW TO PROGRAM DOSES (P6-P7-P8-P9)
From the main screen , press P5 once to see this menu and then P5 once more to enter it and you will
see:
To modify a dose , press P5 and the value will blink, then with P1 or P2 change the parametre
expressed as grinding time and press P5 to confirm
VISUALISATION COFFEE COUNTER
This grinder counts the number of coffees you make, through counters connected to each button
In order to see the coffee counters press P5 once from the main screen and then P3 twice, then you will
see:
1-1) GRINDER N°1
DOSE N°1 – 2,00 sec.
1-2) GRINDER N°1
DOSE N°2 – 4,00 sec.
1-3) GRINDER N°2
DOSE N°1 – 2,00 sec.
1-4) GRINDER N°2
DOSE N°2 – 4,00 sec.
setting range
from 30,00 to 0,05 sec.
step 0,005 sec.
P3
P3
P3
1) DOSES PROGRAMMING
P5
2-1)GR1-DOSE 1
xxxxxxxxx
2-2)GR1-DOSE 2
xxxxxxxxx
2-3)GR2-DOSE 1
xxxxxxxxx
2) Doses Counter
2-4)GR2-DOSE 2
xxxxxxxxx