EasyManua.ls Logo

DallaCorte DC II GCS - User Manual

Default Icon
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
USER’S MANUAL RELEASE 1.07
USER’S MANUAL
For D C II GCS grinder
INDEX
- Data Tag
- Accessories List
- Installer’s Guidelines
- Installation
- Initial Set Up
- Setting
- Alarms Management
DATA TAG
ACCESSORIES LIST
User’s manual
Brush for cleaning
Package of tablets for internal cleaning
Ground coffee container
ATTENTION
ATTENTION
This machine is to be used exclusively for the kind of activity it was designed for. Any other use will be
considered improper and therefore unreasonable. The manufacturer will not be responsible for possible
damages arising from improper, incorrect or unreasonable use of the equipment
Carefully read instructions and guidelines contained in this manual and in the “User’s Manual”, as they
supply important instructions concerning the installation and operation of the unit.
Verify that the user has prepared AN ELECTRICAL SOCKET following the current regulation of the
country where it is installed , making sure that its electric capacity is appropriated for the maximum power
of the grinder, indicated on its data tag.
In case of replacement of the supply cable of the grinder , only use cables as advised by the
manufacturer.
Electric safety is reached only when the electric system connected to the grinder is properly grounded.
Question and Answer IconNeed help?

Do you have a question about the DallaCorte DC II GCS and is the answer not in the manual?

Summary

Data Tag

Accessories List

Important Safety and Usage Instructions

Introduction

Installation

Grinder General Description

Detailed description of the grinder's physical components and labels with Italian terminology.

Command Panel Description

Startup Procedure

Instructions for powering on the grinder and verifying its readiness status on the display.

Grinder Functions

Explanation of how to select doses, adjust grinding, and modify parameters.

Machine Operation Regulations

User Menu Navigation

Flow scheme illustrating the user menu for programming doses, viewing counters, and alarms.

Installer Menu Navigation

Flow scheme illustrating the installer menu for advanced setup, testing, and password management.

User Menu Operations

Programming Doses

Step-by-step guide on how to set grinding times for single and double doses for both grinders.

Coffee Counter Visualization

Instructions on how to access and view the count of coffees dispensed per dose.

Alarms Visualization

Alarm Codes and Descriptions

Detailed list and explanation of various grinder alarms, their causes, and reset procedures.

DallaCorte DC II GCS Specifications

General IconGeneral
BrandDallaCorte
ModelDC II GCS
CategoryCoffee Grinder
LanguageEnglish