MAD
®
Art.-No.: 8400 220
Features:
• Ultra bright long-life LEDs
• Adjustable multicolor LEDs
• Innovative design consisting of combined materials
• Remote range testing function whereby you can make 100 % sure the bite alarm and
receiver are in remote range!
• Range approximately 175 m in a non-disturbed area
• Tone-off vibration function in receiver
• 20 second afterglow period on both the alarm and the receiver
• Micro adjustable sensitivity
• Adjustable volume and tone
• Power-out socket for illuminated hangers or bouncers
• Battery-low alarm on both the indicators and the receiver
• Memory function on both the indicators and the receiver that memorizes all
settings when switched off
• All-weather construction
• Connection ring on receiver to secure it
• Body made out of high-impact ABS material and the special reinforced screw part is
manufactured out of stainless steel
• Non-slip rod support for precise indication
• Available as 3+1 set in a deluxe hard case with reserved room for a 4th (available soon)
• Can be paired with the innovative MAD
®
FSX Bivvy lamp!
• Operates on a 9 V battery and the Receiver on 3 x AAA 1,5 V batteries (batteries not included!)
®
➀
➁
Choose the volume level by pushing the volume button multiple times.
➂
Push the tone button multiple times to select the pitch of your choice.
➃
Push the sensitivity button multiple times to select the proper sensitivity mode for the
circumstances you are shing in. Also here there are 4 grades to be chosen from high to low. The
highest sensitivity takes approx. 0.5 cm of line to activate the alarm, and the lowest takes 10 cm to
trigger the indicator.
➄
Step 1. Switch the receiver ON, but leave the indicator OFF.
Step 2. Press the “S” button on the bite indicator and hold it pressed. Then push the power switch
ON button simultaneously and release it again. At the same time you keep the “S” button
pressed constantly as long until you hear a long constant beep.
Step 3. Now turn on the bite indicator. The alarm will keep on beeping as long as alarm and
receiver are in each other’s range.
You can turn the function off by switching OFF the bite indicator.
To Next Page
Loading...