Before using this appliance ensure that any protective packaging or
coatings have been removed. To aid the protection of the
environment, please sort the packing materials into different types
and dispose of them in accordance with the local waste disposal
laws.
Any further information on waste disposal can be obtained from
your lo
cal Environmental Agency office.
When first used, an odour may be emitted by any residual
protective finish or mo
isture, which will cease after a short period
of time.
This Appliance has been Constructed and Distributed in
compliance with the essential requirements of the following EEC
Directives, European Norms and Australian Standards:
CE Marking – 93/68 Low Voltage – 73/23 EMC – 89/336
Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6
ASNZS 3350-1
, ASNZS 3350-2-6
As the firm has a policy of continued product improvement,
the right is reserved to adjust and make any modifications deemed
necessary without notification.
Keep children away from the packing materials and do not let them
play with it.
2
To Next Page
Loading...
