Need help?Do you have a question about the DAMSON HearBuds and is the answer not in the manual?
Manually control power by holding the button on the left HearBud.
Connect HearBuds to a streaming device via Bluetooth settings.
Actions for pause/resume, skip track, call management, and power.
Use the micro-USB cable to charge the case from a mains supply.
Place buds in case; LEDs indicate charging status (RED/BLUE).
Follow detailed steps to restore connection between buds and device.
Steps to reset HearBuds to factory settings if connection issues persist.
General| Driver Size | 6mm |
|---|---|
| Impedance | 16Ω |
| Bluetooth Version | 5.0 |
| Playtime | 5 hours |
| Frequency Response | 20Hz - 20kHz |
To Next Page