DAN DRYER ELITE 2000 - User Manual

USER INSTRUCTIONS:
 Activate hair dryer by removing the handle. The Elite 2000 offers
three-step adjustable air volume and temperature setting.
 Avoid directing the airflow towards your eyes.
 Do not obstruct free airflow.
 Keep the dryer at an adequate distance from your hair.
 Always replace handle onto housing after use.
MAINTENANCE:
 Clean plastic parts with a cloth wrung in soapy water.
 Do not use corrosive cleaning products.
VARIANT OF THE DAN DRYER
®
ELITE 2000 CLASSIC:
 Model SHAVER is equipped with a 115-230 V shaver plug for electric
razors – and razors only!
IMPORTANT!
This product is covered by the WEEE regulations on the recycling and
recovery of waste electrical and electronic equipment.
 This product is not to be treated as household refuse.
 This product must be recycled if possible.
 Contact local authorities for advice.
 The product may also be returned to the manufacturer/distributor free
of charge. The manufacturer/distributor will ensure proper recycling/
disposal.
INSTALLATION &
USER INSTRUCTIONS
DAN DRYER
®
ELITE 2000 HAIR DRYER
CLASSIC & SHAVER
DAN DRYER A/S
Alsikevej 8 • DK-8920 Randers NV • Tel.: +45 86 41 57 11 • Fax: +45 86 41 60 89

DAN DRYER ELITE 2000 Specifications