Dan Force BOLD-S HEADLAMP - Battery Charging; Charging Process and Indicators

FULLY CHARGE BATTERIES BEFORE FIRST USE.
Inial baery charge may take up to 7 hours.
Subsequent baery charge me will take
5 to 7 hours.
D. Charging the baeries
4
Blinking blue light - Charging
Steady blue light - Done charging
• Remove all baery packaging
• Open the baery pack located on the back
of the headlamp , insert the baeries and
close the silicon cover.
• Open the charging port on the pack and connect
the charging cable
• Connect the cable’s end into an electrical outlet /PC/ Power Bank/Bank/Other
electronic power source USB slot. Input: 1A / 2A