EasyManua.ls Logo

Danby DAR016B1BM - Troubleshooting; No Power; Internal Temperature Not Cold Enough; Appliance Runs Continuously

Danby DAR016B1BM
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breaker
tripped.
• Plug not fully inserted into the wall outlet.
Internal temperature not cold enough • Temperature setting is too warm.
• Door is not shut properly or opened excessively.
• Recently added a large quantity of warm food
to the cabinet.
• Close proximity to heat source or direct sunlight.
• Ambient temperature or humidity is very high.
Appliance runs continuously • Temperature setting is too cold.
• Door not shut properly or opened excessively.
• Recently added a large quantity of warm food
to the cabinet.
• Close proximity to heat source or direct sunlight.
• Ambient temperature or humidity is very high.
Popping, crackling or gurgling noises • These noises are normal. As the compressor
turns on, metal parts undergo expansion and
contraction causing popping or crackling
noises. As the coolant moves through the system
it changes from a liquid to a gas and back
again which can cause gurgling noises.
Danby Consumer Care: 1-800-263-2629
Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
6
TROUBLESHOOTING