6
DOOR HANDLE INSTALLATION
The door handle will ship inside the cabinet to avoid damage during
shipping. It can be installed using the provided hex key and hexagon
bolts found in the accessory bag.
IMPORTANT
Ensure that the door is fully
closed when the appliance is in
operation. Failure to fully close
the door can lead to excessive
condensation and potential
water damage. Danby will not
be responsible for damages from
misuse.
DIMENSIONS
This appliance has the following dimensions:
• 52 cm (20.5”) wide without the handle
• 52.7 cm (20.7”) wide with the handle.
• 84.1 cm (33.1”) high with the regular feet
• 89 cm (35.1”) with the casters
• 52.4 cm (20.6”) deep without the handle
• 58.2 cm (22.9”) deep with the handle
• Allow 12.7 cm (5 inches) of space on the back, sides and top of the
appliance for proper air fl ow.
• This appliance is intended for free-standing installation only and
is not intended to be built into a cabinet or counter. Building in this
appliance can cause it to malfunction.
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
