EasyManua.ls Logo

Danby DAR044KA1MDB - Troubleshooting

Danby DAR044KA1MDB
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breaker
tripped
• Plug not fully inserted into the wall outlet
Internal temperature not cold enough • Temperature setting is too warm
• Door is not shut properly or opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of warm food
to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Appliance runs continuously • Temperature setting is too cold
• Door not shut properly or opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of warm food
to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
TROUBLESHOOTING
6
Danby Consumer Care
Phone: 0300 303 3904
Email: danby@ukwarranty.com
Appliance warranty registration: https://danby.warrantyonline.co.uk
Information in this manual is subject to change without notice.
Consumer Helpline: 0300 303 3904
Danby DAR044KA1MDB - Troubleshooting