Danby DCFM036XC1WDB - Troubleshooting

15
PROBLEM POSSIBLE CAUSE SOLUTION
Does not work • No power to appliance
• Power cord is unplugged
• Wrong voltage is being
used
• Check connection of power cord to
power source
• Plug in appliance
• Use proper voltage
Appliance runs
continuously
• Temperature set too low
(cold)
• Door is not closed
• Hot food was inserted
• Door opened too long or
too often
• Close proximity to heat
source or direct sunlight
• Quick Freeze function is
set
• Set temperature control to warmer
setting
• Close door securely
• Be sure food is at room temperature
before inserting
• Minimize door openings / duration
• Do not place appliance close to heat
sources or direct sunlight
• This is normal
Internal temperature not
cold enough
• No power to appliance
• Power cord is unplugged
• Temperature set too high
(warm)
• Lid is not closed
• Hot food was inserted
• Lid opened too long or
too often
• Air fl ow obstruction
• Wrong voltage is being
used.
• Close proximity to heat
source or direct sunlight
• Check connection of power cord to
power source
• Plug in appliance
• Check setting and adjust as needed
• Close lid securely
• Be sure that food is at room
temperature
• Minimize lid openings / duration
• Allow room for air to circulate around
appliance
• Use proper voltage
• Do not place appliance close to heat
sources or direct sunlight
Noises coming from
the appliance (popping,
cracking, gurgling)
• Internal parts are
expanding and
contracting
• Refrigerant is circulating
in the system
• This is normal
• This is normal
Troubleshooting