Danby DPA120B1WB User Manual (English)

Other manuals for Danby DPA120B1WB

Questions and Answers:

M
Miss Stephanie SmithJul 30, 2025
Why is my Danby Air Conditioner not cool enough?
- C
  Catherine Moore MDJul 31, 2025
  If your Danby Air Conditioner isn't cooling enough, several factors could be at play. First, ensure all windows and doors in the room are closed to prevent warm air from entering. Remove any heat sources from the room if possible. Check that the exhaust air hose is properly connected and not blocked. Also, make sure that your temperature setting isn't too warm, try decreasing it. Finally, a dirty air filter can restrict airflow, so clean the air filter.
A
andrea69Aug 5, 2025
What to do if my Danby DPA120B1WB shuts off in Heating mode?
- L
  Laurie NortonAug 5, 2025
  If your Danby Air Conditioner shuts off in Heating mode, it's likely due to the automatic overheat protection function. When the air outlet temperature exceeds 70°C/158°F, the device will stop. To resolve this, switch the unit on again after it has cooled down and reduce the temperature settings.
K
Kristina RamirezAug 10, 2025
What to do if my Danby Air Conditioner power shut off at Heating mode?
- C
  Candace GarciaAug 10, 2025
  If your Danby Air Conditioner shuts off in heating mode, it's likely due to the automatic overheat protection function. When the air outlet temperature exceeds 70°C/158°F, the unit will stop. To resolve this, switch the unit on again after it has cooled down and reduce the temperature settings.
B
Brad HughesAug 15, 2025
How to fix Danby Air Conditioner that does not start?
- A
  aguilarcoryAug 15, 2025
  If your Danby Air Conditioner does not start when pressing the on/off button, it could be due to a couple of reasons. First, check if 'P1' appears in the display window, which indicates that the water in the bottom tray needs to be drained. Second, if you're in cooling mode, the room temperature might be lower than the set temperature; in this case, reset the temperature.
K
Kirk Koch PhDAug 20, 2025
How to reduce noise and vibration from my Danby DPA120B1WB Air Conditioner?
- T
  Taylor HollandAug 20, 2025
  If your Danby Air Conditioner is noisy or vibrating, it might be because the ground is not level or flat enough. Placing the unit on a flat, level surface, if possible, should resolve the issue.
Z
Zachary YoungAug 25, 2025
What is the reason for gurgling sound in Danby DPA120B1WB?
- S
  Sara MorganAug 25, 2025
  The gurgling sound you hear in your Danby Air Conditioner is a normal operational sound. It comes from the flowing of the refrigerant inside the air conditioner.