To Next PageTo Next PageWhat to do if my Danby DPAC10099 unit does not work?
If your Danby Air Conditioner isn't working, it could be due to a power outage, in which case you should wait for the power to return. Alternatively, the plug might not be properly inserted; make sure it is securely plugged in.
Why does my Danby DPAC10099 Air Conditioner unit suddenly stop during operation?
Your Danby Air Conditioner might suddenly stop working because the full-tank indicator is on, meaning the tank is full and needs to be emptied. Remove drain water from the drain tank. Another reason could be current leaking or pressing the test button on the LCDI plug. In this case, press the reset button after resolving the problem.
What to do if condensed water spills out when moving the Danby DPAC10099 unit?
If condensed water spills out when you move your Danby Air Conditioner, it's likely that the full-tank indicator is on and the tank is full; you should remove the drain water from the drain tank. It could also mean that the tank is nearly full, in which case you should remove the drain plug on the rear bottom and drain out the water.
How to fix a Danby DPAC10099 Air Conditioner that functions but the room is not cooled?
If your Danby Air Conditioner is running but not cooling the room, several factors could be at play: * The indoor set temperature may have been reached. Try resetting the temperature level. * The preset time could be up; reset the timer. * The surrounding temperature might be too high or low, which is normal. * There might be a heat source or too many people in the room; move any heat sources away from the room.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 10, 000 BTU |
| Power Supply | 115V / 60Hz |
| Room Coverage | Up to 450 sq. ft. |
| Operating Modes | Cool, Fan, Dehumidify |
| Fan Speeds | 3 |
| Refrigerant | R410A |
| Noise Level | 53 dB(A) |
| Warranty | 1 year |
Details electrical requirements, plug, grounding, and extension cord usage.
Provides recommendations for efficient operation and energy savings.
Instructions for installing the window slider kit and exhaust hose.
Details of POWER SWITCH, MODE, FAN, and AUTO-TIMER buttons.
Explains the meaning of various icons and indicators on the LCD screen.
Step-by-step guide to operating the unit in air conditioning mode.
Instructions for operating the unit in dehumidifier mode.
Instructions for operating the unit in fan-only mode.
Explains how to set automatic on/off programs for the unit.
Details the buttons and battery replacement for the remote control.
Guidelines for cleaning the exterior and interior components of the unit.
Instructions on how to remove, clean, and replace the air filter.
