M
Maria SkinnerAug 17, 2025
What to do if my Danby Washing machine does not drain?
- HhudsonjohnAug 17, 2025
If your Danby washing machine isn't draining, check to see if the drain hose is bent. There may also be a problem with the drain pump.
To Next PageTo Next PageWhat to do if my Danby Washing machine does not drain?
If your Danby washing machine isn't draining, check to see if the drain hose is bent. There may also be a problem with the drain pump.
How to fix a Danby DWM060WDB Washer that does not drain?
If your Danby washing machine isn't draining, check to see if the drain hose is squashed or bent. Also, make sure that the water hose mesh filter is not clogged.
Why is my Danby DWM060WDB Washer not operating?
If your Danby Washer isn't operating, there are several possible reasons: it might not be plugged in, the circuit breaker could be tripped, or a fuse might be blown. Also, make sure the lid is completely closed and the water source is turned on.
What to do if my Danby Washer vibrates too much or is too noisy?
If your Danby washing machine is vibrating excessively or is too noisy, consider these possibilities: ensure the washer is level, check that the washing machine isn't touching any other objects, and make sure the laundry load is balanced properly.
Why is there no water or insufficient water supply in my Danby DWM060WDB Washer?
If your Danby Washer has no water or an insufficient water supply, check the following: ensure the water source is turned on, verify that the water inlet hose isn't bent, and inspect the filter screen in the water inlet for any clogs.
Why is my Danby Washer not spinning?
If your Danby Washer isn't spinning, it could be due to a couple of reasons: ensure that the lid is completely closed and verify that the washer is level.
Why is my Danby Washer filling and draining at the same time?
If your Danby Washer is filling and draining simultaneously, make sure the drain hose is elevated 0.7 mm to 1.2 mm off the floor. If the drain hose is too low, it can cause water to siphon out of the appliance as it fills.
What to do if my Danby DWM060WDB Washer does not operate?
If your Danby Washer isn't operating, make sure it's properly plugged in and that the circuit breaker hasn't tripped, or a fuse hasn't blown. Also, ensure the lid is completely closed and the water source is turned on.
Why is my Danby Washer vibrating or too noisy?
If your Danby washing machine is vibrating excessively or is too noisy, ensure the washer is level and not touching any other objects. An unbalanced laundry load can also cause these issues.
General| Type | Top Load |
|---|---|
| Spin Speed | 700 RPM |
| Color | White |
| Control Type | Electronic |
| Installation Type | Free Standing |
| Voltage | 120V |
