DANCHEE Ridgerock CRAWLER - Vehicle Operation - Part 1; Powering Up Procedures

1
TURNING ON THE RADIO
1) With the steering wheel centered, the vehicle will run in a straight line.
2) With the steering wheel turned to the left, the vehicle will steer to the left.
3) With the steering wheel turned to the right, the vehicle will steer to the right.
If the vehicle turns right when you steer left,
flip the “Steering Reverse” switch.
If the vehicle turns left when you steer right,
flip the “Steering Reverse” switch.
With a fully charged battery installed and properly
plugged in, press and hold the power button,
located on the chassis, to power up the vehicle.
Slide the radio power switch to the
“ON” position.
"O" = OFF "I" = ON
CENTER
With the radio and vehicle turned on:
TURN LEFT
TURN RIGHT
RUNNING THE VEHICLE:
RIDGEROCK
3
CHECK THE STEERING
2
TURNING ON THE VEHICLE