Need help?Do you have a question about the D&B D6 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Amplifier Technology | Class D |
| Max. Output Power per Channel (4 Ohms) | 600 W |
| Max. Output Power per Channel (8 Ohms) | 350 W |
| Input Impedance | 20 kOhms |
| Sampling Rate | 96 kHz |
| Weight | 7.3 kg (16 lbs) |
| Damping Factor | > 200 |
| Signal to Noise Ratio | >100dB |
| Mains Voltage | 100-240V AC, 50/60Hz |
| Signal-to-Noise Ratio | >100dB |
Provides cautions against opening the unit and advises servicing by authorized personnel only.
Details front panel controls: Power switch, MUTE/STANDBY switches, and LEVEL/PUSH MENU encoder.
Explains front panel indicators: ISP, GR, OVL LEDs, and the LC Display status.
Details the PowerCon mains connector, voltage specifications, and safety precautions for power connection.
Explains the NL4 loudspeaker output connectors and their pin assignment for different speaker types.
Details power consumption and power loss figures for the amplifier.
Outlines protection circuits like inrush current limiter, overvoltage, and short circuit protection.
Covers audio data parameters, DSP sampling rate, latency, and dynamic range.
To Next Page
