4
1. 1. GENERAL ACCIDENT PREVENTION
For the machine to function properly, it must be set-up correctly (installation and use) and
the oil level for the various mechanisms must be checked. Inadequate controls or errors in
installation and use can compromise machine efficiency and jeopardize operator safety.
All information and illustrations contained in this manual refer to the model in production at
the time of publication.
For further information, contact an Authorized Service Centre.
The Manufacturer reserves the right to make modifications without prior notification.
Everything contained in this manual is the work of the manufacturer and no part or
illustration herein can be used for other purposes without prior authorization
Prudence is the best defence in preventing accidents and injuries.
Before starting up the machine, carefully read all the instructions contained in this manual.
If you have any doubts, contact the Manufacturer.
Before starting up the engine, make certain that there are no people near the machine, in
particular children.
Never transport or lift people.
Never operate the machine unless you are in good physical condition: never drink
alcoholic beverages while working.
This machine is not approved for roadway driving.
Never use the machine on steep slopes. Use it only on terrain where the slope is less than
the limits indicated below.
Never leave the machine with the Diesel engine running. The engine must always be
turned off and the bucket, if present, must be set on the ground.
Never let minors run the machine.
Never use the machine in confined, poorly aerated spaces: the exhaust gases are
poisonous and could seriously injure the body or even lead to death.
The engine must always be off when refuelling. Always keep away from open flames. Do
not smoke.
When performing maintenance, never throw hydraulic oil or lubricant and other liquids on
the ground. Always collect and dispose of them through an Authorized Company.
Never let any unauthorized persons operate the machine. The person assigned to the
machine is responsible for any damage or harm incurred by third parties.
To Next Page
Loading...