13
Lifting of the loading bucket for unloading, must be carried out very slowly to
prevent swinging, which could cause the machine to tip over.
Before lifting the load, check that the material contained in the loading bucket has
been positioned in a way to prevent its accidental escape during movement.
If the loading bucket is also equipped with a shovel, it must be positioned as high
as possible, to prevent it from interfering with the remaining structure when tipping
over.
TRAVELING OVER A FLAT SURFACE
GOING UP OR DOWN
GOING UP OR DOWN, EMPTY AND WITH LOAD
MAX 30 % 10% MAX
MAX 22 %
To Next Page
Loading...