36
Keep cable terminals secured well and protect with grease or, better still, with pure
Vaseline.
When disconnecting the battery, the ground cable (-) must be disconnected first.
When connecting the battery, the positive cable (+) must be connected first.
Keep equipment and metal objects away from the battery terminals because they could
cause short-circuiting of the terminals themselves and the danger of burns.
To recharge, always contact an Authorized Workshop.
The fuses box is situated in the left side of the machine, on the opposite side than the
power take off. The accessibility is very easy.
FUSES ALLOCATION
REF. DEVICE CAPACITY
F1
Ignition fuse
5 A
F2
Engine stop fuse
15 A
F3
Battey / Alternator fuse
10 A
F4
Hour counter fuse
15 A
F5
Preheating fuse
10 A
F6
Not used
-
F1
F3
F5
F2
F4
F6
To Next Page
Loading...