8
Download User Manual on www.danedigital.com
Wireless : via WIFI (2)•
Select your Access Point in the list:
Ex : Dane-Elec Guest with the remote control
Then push "ENTER"
"Auto"
"ENTER"
Select Wireless Security : Ex : I WPA/WPA2 Key
"ENTER"
Enter your password then "OK", "ENTER",
Save setting, "ENTER"
"Testing Screen"
Now it’s OK
Push left arrow of the remote control to exit.
NB : Don’t choose wired or wireless network both in the same time
To see data’s from:
USB external HDD or USB Pendrive:
Connect your USB external HDD to So G-Stream.•
Select USB DEVICE on the screen, wait 10 sec.•
«ENTER»•
To Next Page
Loading...
