What to do if my DANE-ELEC SO SMART doesn't respond to the remote control?
If your DANE-ELEC Media Player isn't responding to the remote, first, try reducing the distance between the remote and the player. If that doesn't work, replace the remote batteries. As a last resort, perform a hardware reset procedure.
How to fix DANE-ELEC SO SMART when it doesn't recognize the HDD?
If your DANE-ELEC Media Player isn't recognizing the HDD, check the IDE / USB connection to the Hard Disk Drive (HDD). Also, ensure that the HDD has been correctly partitioned and formatted. You might also try changing the jumper settings to MASTER or SINGLE. If that doesn't work, try SLAVE or CABLE SELECT (CS) jumpers.
What to do if my DANE-ELEC SO SMART has no screen display?
If your DANE-ELEC Media Player shows no screen display, start by pressing the TVOUT button on the remote to toggle between TVOUT settings. Then, check the TV-OUT settings and cable-type on the player, making sure they match the VIDEO-IN settings of your TV. Finally, ensure the video cable is securely connected to both the player and the TV.
Why can't my DANE-ELEC SO SMART Media Player play video files?
If your DANE-ELEC Media Player is unable to play video files, first ensure that the selected video file contains supported video codec. If the issue persists, defragment the HDD. Also, if playing a file from a Network-shared PC, there may be too much traffic on the network (check for virus). Try to reboot your PC and establish connection again.
How to fix 'Cannot view the Network -shared Folder' issue on DANE-ELEC SO SMART Media Player?
If you cannot view the Network-shared Folder on your networked-PC using DANE-ELEC Media Player, check the network connection between your PC and the Player. Reboot the Player and re-establish the connection. Depending on your network environment, there may be a delay in searching for the network; try to REFRESH. Also, ensure that WEP and ESSID settings are accurate.
General| Brand | DANE-ELEC |
|---|---|
| Model | SO SMART |
| Category | Media Player |
| Storage | 8GB |
| Card reader | SD/SDHC |
| Screen size | 3.5 inches |
| Supported Video Formats | AVI, MP4 |
| Supported Audio Formats | MP3, WMA, AAC, FLAC, APE |
| Supported Image Formats | JPEG, BMP |
| Output Resolution | 720p |
| Connectivity | USB 2.0, AV output |
| Power Supply | Rechargeable Li-ion battery |
| Storage Support | Up to 32GB via SD card |
To Next Page
