17
Chapter 3 : Basic Setup
3.3 The SETUP Menu
First time
No image on screen if your TV don’t have HDMI
port.
If you don’t see any picture on screen, while
your player is connected to your TV, please press
several times the “TVOUT” button on the top left
of the remote control. Please wait a few seconds
between each push on the button. Image should
appear after some pushes (location of the right
video out).
Use the navigation button on the So Smart
Remote to select the TV icon/option. This option
allows you to configure your video-out settings.
Use the right-arrow button on the So Smart
Remote to navigate to the main panel and
select configuration option. Press ENTER on each
configuration to view available setup options.
SPDIF out: DownMix and Passthrough
Audio Channel: 2 Channels and 5+1 Channels.
Video Out: S-Video, Component, DVI etc.
TV Standard: PAL versus NTSC (USA customers use
NTSC)
TV Type: 4:3 versus 16:9 (If using Widescreen
Display / TV use 16:9)
To Next Page
Loading...
Need help?
General
