What to do if the Danfoss Air a2 shows a fire alarm?
If the Danfoss Fan system's temperature sensor detects a temperature higher than +70°C, examine all rooms and leave the premises. If there is no longer an emergency and the system is ready for operation, shut down the ventilation system and switch the power on again to resume normal operation by disconnecting and reconnecting the power cable.
How to fix a 'Filter error' alarm on my Danfoss Fan?
The alarm indicates that the air filters are dirty. Replace the air filters following the instructions in chapter 3.1.
General| Protection Class | IP44 |
|---|---|
| Type | Axial |
| Mounting | Wall |
| Voltage | 220-240 V |
| Operating Temperature | -20°C to +40 °C |
| Power Supply | AC |
Command to reduce air volume to a minimum for prolonged absences.
Cooling function to stop heat exchange and let outdoor air in directly.
Displays the present status of the unit, including temperatures and fan steps.
Command to increase air volume temporarily for situations like cooking or parties.
Allows changing how the ventilation system is controlled, with different profiles.
Illustrates the navigation path through the system's menus and functions.
Enables customization of system parameters and weekly programs.
Details the process of replacing air filters for optimal air quality.
Provides instructions for cleaning the internal components of the ventilation unit.
Guide on how to replace batteries in the Air Dial remote control.
Information on ordering and types of standard and pollen filters.
Explains how to manage the system remotely via a PC interface.
Discusses electric and water-based heating surfaces for temperature control.
Details the use of geothermal energy for preheating or precooling air.
To Next Page
