What to do if the Danfoss Air w1 shows a fire alarm?
If the Danfoss Fan system's temperature sensor detects a temperature higher than +70°C, examine all rooms and leave the premises. If there is no longer an emergency and the system is ready for operation, shut down the ventilation system and switch the power on again to resume normal operation by disconnecting and reconnecting the power cable.
How to fix a 'Filter error' alarm on my Danfoss Fan?
The alarm indicates that the air filters are dirty. Replace the air filters following the instructions in chapter 3.1.
Sets the system to a minimum air volume for prolonged absences, with automatic return to normal operation.
Enables direct outdoor air intake, bypassing the heat exchanger for cooling purposes, activated manually or automatically.
Displays current system status, including temperatures, fan steps, and humidity levels.
Increases air volume to maximum speed for short periods, suitable for parties or cooking with strong odours.
Allows selection of different ventilation control modes: Manual, Demand, and Programme for customized comfort.
Provides a visual overview of the system's menu hierarchy and navigation paths for functions and settings.
Enables customization of default system parameters, including weekly programs, bypass, boost, and time settings.
Instructions for replacing air filters, including visual inspection, cleaning, and resetting the filter alarm.
Procedure for cleaning the internal components of the ventilation unit, including heat exchanger and interior surfaces.
Guide on how to replace the batteries for the Air Dial remote control when indicated by an alarm.
Details on standard and pollen filter types, their part numbers, and selection criteria based on allergy needs.
Information on connecting and controlling the Danfoss Air system via a PC using the provided software and features.
Explanation of electric and water-based heating surfaces for preheating and afterheating air, including geothermal options.
Troubleshoots common alarms like filter alerts, low battery, connectivity loss, and temperature warnings on the Air Dial.
Addresses operational issues such as condensation, overheating, pressure imbalances, and thermostat settings.
Identifies causes of noise from the unit or air valves and provides solutions, including defrost mode indication.
To Next Page
General
