Danfoss DHP-L Opti User Manual

5. Remove the strainer.
6. Rinse the strainer.
7. Reinstall the strainer.
8. Check that the o-ring on the cover is not damaged.
9. Screw the cover back into place.
10. Turn the shut-off cock to the open position.
11. For the brine circuit strainer - reinstall the insulation around the
filler cock.
12. Start the heat pump.
User manual VUBMA902 – 25

Danfoss DHP-L Opti Specifications

General

Brand	Danfoss
Model	DHP-L Opti
Category	Heat Pump
Language	English