Need help?Do you have a question about the Danfoss DHP-AQ and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Type | Air-to-water heat pump |
| Energy efficiency class | A++ |
| Operating temperature range | -20°C to +35°C |
| Power Supply | 230V/400V, 50Hz |
| COP (Heating) | 4.5 |
Safety guidelines for authorized installers during installation, operation, maintenance, and repair.
Regulations for authorized installers performing modifications on the heat pump system.
Safety measures for the hot water circuit's safety valve and overflow pipe.
Identifies and describes the main components of the heat pump's outdoor unit.
Presents the different models available for the heat pump's indoor control unit.
Explains the process by which the heat pump generates heat for the house and hot water.
Details the functionality and prioritization of hot water production by the heat pump.
Describes the automatic defrost mechanism to maintain air heat exchanger efficiency.
Explains the process and conditions under which the heat pump provides cooling.
How the fan speed is regulated based on operational requirements and temperatures.
Explains the role of the electronic expansion valve in optimizing refrigerant flow.
Details the auxiliary heating elements and their power stage control.
Explains how circulation pump speed is adjusted for optimal heating system efficiency.
Describes the usage of the keypad buttons for navigating menus and adjusting values.
Explains the different states and meanings of the indicator light on the control panel.
Explains the meaning of various symbols and operational messages displayed on the unit.
Guides on how to access and navigate through the main menu options.
Explains how to select and change the operational modes like AUTO, COMPRESSOR, etc.
Details how to adjust the heat curve to achieve the desired indoor temperature.
Explains how to control individual distribution circuits for heating and cooling.
Describes the settings for managing hot water production and top-up functions.
Details the controls for enabling, disabling, and setting the cooling mode.
Instructions on how to view various temperature readings from the heat pump.
How to check the total operating hours for the heat pump and its components.
Step-by-step guide to manually initiate the defrosting process.
Explains how to use the calendar for scheduling various heat pump functions.
Information on accessing and interpreting the stored alarm history.
How to verify the heat pump is operating correctly using indicators and display.
Procedure for checking and maintaining the correct water level in the heating circuit.
Routine checks for safety valves to prevent malfunctions and ensure safety.
Actions to take in case of a leakage in the hot water pipes.
Step-by-step instructions for cleaning the heating circuit strainer.
To Next Page
