Need help?Do you have a question about the Danfoss EKC 302B and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | EKC 302B |
| Category | Controller |
| Language | English |
Controller for temperature control in refrigeration appliances and cold rooms.
Methods for initiating defrost: interval, time, manual, S5-temp., network, and DI.
Initiates defrost based on refrigeration time or S5 temperature variation.
Step-by-step guide for setting menu parameters and temperature values.
Settings for compressor running times and relay functions.
Parameters for defrost method, stop temperature, interval, duration, and fan control.
Lists of fault, alarm, and status codes for troubleshooting and diagnostics.
Regulation based on set value, displacement, and limitations. Includes set point adjustment.
Detailed settings for alarm delays, upper/lower limits, and condenser alarms.
Parameters for minimum ON-time and OFF-time to protect the compressor.
Settings for defrost method, stop temperature, and interval between defrosts.
Parameters for maximum defrost duration and time staggering for start-up.
Defrost initiation based on aggregate refrigeration time or S5 temperature variation.
Defines various functions for the digital input signal (DI).
Details on how alarms are indicated (LEDs, relay) and categorizes them (A-alarms, E-alarms).
Specifies power requirements and details on Sair and S5 sensor connections.
Ordering information for EKC 202A, 202B, and 202C refrigeration controllers.
Ordering information for EKC 302A and 302B refrigeration controllers.
Details on supply voltage, sensor types, measuring range, accuracy, and digital inputs.
To Next Page
