Danfoss EKC 316A Reference Manual

EKC 316A Reference manual RS8ED102 © Danfoss 03-2006 5
Compensation value for spindle play at valve’s closing point (number of steps) n39 Start bcklsh (Menu=Danfoss only)
Compensation value for spindle play during operation (number of steps)
n40 Backlash (Menu=Danfoss only)
Valve definition
1=Valve must open when more capacity is required (NC function)
2=Valve must close when more capacity is required (NO function)
n41 Valve type (Menu=Danfoss only)
Compensation direction
1=Compensation takes place when the valve opens (normal setting)
2=Compensation takes place when the valve closes
n42 Comp.dir. (Menu=Danfoss only)
Backlash Compensation
The controller includes a procedure for compensating for
backlash on the ETS valve spindle. The parameters involved in this
procedure are listed below
These parameters should not be changed and the reason the
parameters are accessible is only historical, and at some point will
be withdrawn from the menu.

Danfoss EKC 316A Specifications

General

Brand	Danfoss
Model	EKC 316A
Category	Controller
Language	English