Instruction Manual
11 |
P a g e
GRAPHING
h) The fridge is able to log data of the temperature and voltage recorded by the fridge. This can be
handy when trouble shooting. (E.g. If you have a problem once the fridge has been running for a
while you can review this data. Take a screenshot (Refer to Google on how to take a screenshot
with your model Smartphone) and then email it to Evakool for review, if necessary. )
The data is viewable after approximately 10 minutes of running. The maximum data recorded is
approximately 24 hours, worth.
Note: The temperatures recorded are in the walls so there may be some variation and delay
compared to air sensing thermometers.
Note: The voltages recorded are measured inside the fridge at the internal connectors so these will
be different to your battery/solar voltage readings.
Take note that you may have to zoom in or out to see the full graph. This can be done using your
fingers in a pinching motion.
To Next Page
Loading...