Danfoss VLT 5005 Installation Startup Check List

8
Pre-Installation Check
• Record motor data information
– Motor Power
– Motor Voltage
– Motor Frequency
– Motor Current (FLA)
– Motor Speed (RPM)
Write down the motor nameplate information. This will be important later during
programming. A conversion between HP and kW must be calculated 1Hp = 0.75kW.
In the example 20Hp = 15kW.
Motor Power = ___________________ kW
Motor Voltage = __________________ Vac
Motor Frequency = 50Hz 60Hz
Motor Current = __________________ Amps
Motor Speed = ___________________RPM

Danfoss VLT 5005 Specifications

General

Brand	Danfoss
Model	VLT 5005
Category	DC Drives
Language	English