Need help?Do you have a question about the Danfoss VLT 5000-P and is the answer not in the manual?
General| Type | DC Drive |
|---|---|
| Series | VLT 5000-P |
| Protection Features | Overvoltage, Undervoltage, Short circuit |
| Communication Interfaces | RS-485, Profibus DP, CANopen |
| Enclosure Rating | IP20 |
Crucial safety information and electrostatic discharge procedures for service.
Alerts to fault conditions, warnings, alarms, and their definitions in a fault table.
Tips for safe repair, exterior fault checks, and visual inspection checklist.
Diagnosing issues based on display messages, motor operation, or alarms.
Procedures to ensure proper operation after repair or initial setup.
Tests performed without power to check components.
Testing of soft charge, rectifier, and inverter circuits and components.
Tests performed with power applied to diagnose faults.
Troubleshooting display issues, power supplies, and input signals.
Testing output signals, SCRs, IGBTs, current sensors, and fans.
Procedures for initial startup or post-repair testing.
To Next Page