Danfoss VLT 5000-P User Manual

6-21
VLT is a registered Danfoss trademark
6.15 AC Input Terminals
1. Remove AC input power cabling, as required.
2. Remove R/L1, S/L2, T/L3 terminals by removing 3
retaining screws.
Reinstall in reverse order of this procedure. Tighten mounting
nuts per specifications in the unit's instruction manual.
Figure 6-14. AC Input Terminals
AC input terminal
AC input cable connector
(Step 1)
Retaining screws
(Step 2)
Retaining screw
(Step 2)

Danfoss VLT 5000-P Specifications

General

Brand	Danfoss
Model	VLT 5000-P
Category	DC Drives
Language	English