7
Pre-Installation Check
• Be sure the Line Power, AFD and Motor have the same voltage
range
• Insure that all hand tools and kits are available.
Before installing the drive, check to be sure that the power line, the drive, and the motor are
all rated for the same voltage. It may be necessary to check the wiring inside the motor's
conduit box to confirm its voltage rating.
Options and kits:
Part numbers for Dynamic Brake Resistors, additional RFI Filters, LCP Remote mounting kit,
serial communication cards, application cards, additional relay cards, LC Filters and
Terminal Lug Kits are covered in the catalog.
To Next Page
Loading...
Need help?
General