DANGO CR-01 - DV-01 & TK-01 Operations; Time and Date Setting; DV-01 Screw Down Crown

DV-01 & TK-01
POSITION 1: WATCH IS RUNNING
PUSHED ALL THE WAY IN, WATCH IS RUNNING, DATE IS
ACTIVE. ROTATING THE CROWN IN THIS POSITION
YIELDS NO RESULTS.
POSITION 2: SETTING THE DATE
- PULL THE CROWN OUT TO POSITION 2.
(WATCH IS STILL RUNNING)
- ROTATE THE CROWN COUNTER CLOCKWISE UNTIL
THE REQUIRED DATE APPEARS.
- PUSH THE CROWN BACK INTO POSITION 1 TO SET
THE REQUIRED DATE.
POSITION 3: SETTING THE TIME
- PULL THE CROWN OUT TO POSITION 3.
(WATCH IS STOPPED)
- ROTATE THE CROWN FORWARD & BACKWARD
UNTIL THE DESIRED TIME IS DISPLAYED
- PUSH THE CROWN BACK INTO POSITION 1 TO SET
THE DESIRED TIME.
SCREW DOWN CROWN (DV-01 ONLY)
THE CROWN WILL HAVE TO BE TURNED
COUNTERCLOCKWISE UNTIL IT RELEASES FROM THE
CASE TO ADJUST THE TIME/DATE.
THE CROWN MUST BE SCREWED DOWN COMPLETELY
TO ACHIEVE WATER RESISTANCE.