DANGO CR-01 - DV-01 and TK-01 Watch Overviews; DV-01 Overview and Crown Positions; TK-01 Overview and Crown Positions

ROTATING BEZEL
ROTATE COUNTER-
CLOCKWISE ONLY
DV-01
TK-01
CROWN
POSITIONS
CROWN
POSITIONS
1 2 3
1 2 3
CR-01
POSITION 1: WATCH IS RUNNING
PUSHED ALL THE WAY IN, WATCH IS RUNNING, DATE IS
ACTIVE. ROTATING THE CROWN IN THIS POSITION
YIELDS NO RESULTS.
POSITION 2: SETTING THE DATE
- PULL THE CROWN OUT TO POSITION 2.
(WATCH IS STILL RUNNING)
- ROTATE THE CROWN COUNTER CLOCKWISE UNTIL
THE REQUIRED DATE APPEARS.
- PUSH THE CROWN BACK INTO POSITION 1 TO SET
THE REQUIRED DATE.
POSITION 3A: SETTING THE TIME
- PULL THE CROWN OUT TO POSITION 3.
(WATCH IS STOPPED)
- ROTATE THE CROWN FORWARD & BACKWARD
UNTIL THE DESIRED TIME IS DISPLAYED
- PUSH THE CROWN BACK INTO POSITION 1 TO SET
THE DESIRED TIME.
STOP WATCH
- PRESS PUSH-BUTTON A ONCE TO START YOUR TIMER.
PRESS PUSH-BUTTON A AGAIN TO STOP.
- PRESS PUSH-BUTTON B TO RESET THE STOP WATCH