Pg 6 Pg 7
DANIELAAPPLIANCES.COM.AU DANIELAAPPLIANCES.COM.AU
• If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
• Remove the door to the washing compartment when removing an old
dishwasher from service or discarding it.
Please dispose of packing materials properly.
• Use the dishwasher only for its intended function. During installation, the
power supply must not be excessively or dangerously bent or flattened. Do
not tamper with controls.
• The appliance is to be connected to the water mains using new hose sets
and that old hose-sets should not be reused.
• The maximum number of place settings to be washed is 12.
• The maximum permissible inlet water pressure is 1Mpa.
• The minimum permissible inlet water pressure is 0 .04Mpa.
IMPORTANT SAFETY INFORMATION
Height (H)
Width (W)
Depth (D1)
Depth (D2)
845mm
598mm
600mm ( with the door closed )
1175mm ( with the door opened 90° )
845mm
598mm
1175mm
PRODUCT SPECIFICATIONS
600mm
To Next Page
Loading...
