Need help?Do you have a question about the Danita APA100 and is the answer not in the manual?
Introduces the danita APA100 as a pager and alarm system comprising a transmitter and receiver.
Details wire connections for triggering and alarm call coding, including specific wire functions.
Provides instructions for mounting the transmitter antenna to the BNC connector, advising on placement.
Explains the receiver's On/Off/Reset knob functions and describes various light and vibration status indications.
Provides a step-by-step procedure to code an extra receiver to the transmitter for system expansion.
Details the process for setting the receiver to Standard or Out Of Range modes using the reset knob.
Lists technical specifications for the transmitter, including frequency, power, voltage, and dimensions.
Lists technical specifications for the receiver, including battery type, current drain, and dimensions.
Instructs users on the proper and responsible disposal of the device, recommending recycling centers.
General| Detection Range | Up to 12 meters |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Color | White |
| Type | PIR Motion Detector |
| Detection Angle | 110° |
| Humidity | Up to 95% RH (non-condensing) |
| Material | Plastic |
To Next Page