Dannmar D-10 Series User Manual

A
N
D
V
A
L
I
D
A
T
E
D
Rev D 06202018
P/N 199824

Dannmar D-10 Series Specifications

General

Brand	Dannmar
Model	D-10 Series
Category	Lifting Systems
Language	English

Summary

IMPORTANT NOTICE

INSTALLATION INSTRUCTIONS

STEP 1 (Selecting Site)

Guidelines for choosing the optimal location for lift installation, considering space and obstructions.

STEP 2 (Floor Requirements)

CONCRETE SPECIFICATIONS

STEP 4 (Site Layout)

STEP 5 (Install Powerside Column)

STEP 6 (Mounting The Offside Column)

STEP 8 (Mounting the Power Unit)

Step 9 (Installing the Safety System)

STEP 10 (Installing Hydraulic Lines)

STEP 11 (Routing the Equalizer Cables)

STEP 12 (Attaching The Power Unit Hose)

STEP 14 (Wiring the Power Unit)

STEP 15 (Installing the Lift Arms)

STEP 16 (Leveling Instructions)

STEP 17 (Start Up)

POST INSTALLATION CHECK OFF

STEP 19 (Operational Test Procedure)

OPERATION INSTRUCTIONS

LIFT OPERATION SAFETY

Crucial safety guidelines and precautions for operating the lift safely and effectively.

TO RAISE THE LIFT

TO LOWER THE LIFT

MAINTENANCE INSTRUCTIONS

LIFT LOCKOUT / TAGOUT PROCEDURE

Safe Lift Operation

LIFT OPERATION / SAFETY

Key principles and practices for safe vehicle lifting operations, including load limits and clearances.

TROUBLESHOOTING GUIDE

LIFT WILL NOT RAISE

MOTOR WILL NOT RUN

LIFT LOWERS SLOWLY OR NOT AT ALL

WILL NOT RAISE LOADED LIFT

LIFT WILL NOT STAY UP

Installing a Power Disconnect Switch